Bataccen kumfa, wanda kuma aka sani da fari, shine ƙirar da ake amfani da shi don yin simintin gyare-gyare.Ana samun ɓataccen ƙwayar kumfa ta hanyar jefa ƙurar kumfa bayan warkewa da kumfa.Lokacin da aka yi gyare-gyaren, zai kuma lalace saboda wasu dalilai, kamar kumfa da aka rasa.Bayan an samar da gyambon sai a ga an samu karancin kayan aiki, to mene ne dalilin faruwar haka?

1. Poor bead pre-ci gaba

A karkashin yanayi na al'ada, lokacin da matsa lamba na iska ya kasance akai-akai, ƙarfin beads ɗin da aka riga aka faɗaɗa yana raguwa tare da tsawaita lokacin samun iska, kuma yawan adadin beads ɗin da aka rigaya ya ragu yana raguwa tare da karuwar tururi lokacin da lokacin samun iska ya kasance. ba canzawa.Kafin a fara fashewar, idan ba a yi gwajin bead ɗin gaba ɗaya ba, ƙayyadaddun ƙayyadaddun ƙwayoyin barbashi ba daidai ba ne, ko saurin motsawar ya yi sauri, ana dumama bead ɗin ba daidai ba, wanda zai haifar da rashin isassun fiddawa da rashin daidaituwa na wasu beads. .Wannan zai haifar da sabon abu na ƙarancin kayan gyare-gyare.

2. Rashin ingantaccen sakamako

Dalilin rashin ƙarancin ripening sakamako na iya zama cewa iskar tururi bai isa ba.Domin sauƙaƙa haɗin ƙulla tsarin gyare-gyare, dole ne a ripens beads da aka aiko da su.Sabili da haka, tasirin ripening yana da girma, wanda ke da alaƙa da rashin kayan aiki.

3. Rashin wadatar kayan aiki

Lokacin da aka yi gyare-gyaren, ƙarancin wadatar kayan yana yawanci saboda yanayin "gadowa" a tashar ciyarwa, wanda zai haifar da ƙarancin alluran kayan aiki, wanda zai haifar da sabon abu na ƙarancin gyare-gyare.

4. Mummunan ƙyallen ƙura

Bincika ko akwai kogon kayan sanyi, ko ko matsayin daidai ne.Don ƙirar da ke da rami mai zurfi, ya kamata a ƙara magudanar ruwa da ramin ramuka a ɓangaren da ke ƙarƙashin ƙasa, kuma za a iya buɗe madaidaicin tsagi mai girma a kan matsewar.Hakanan ya kamata a saita ramin shaye-shaye a ƙarshen cika rami.Idan tashar shaye-shaye ba ta da ma'ana, zai haifar da cikawa ga ƙarancin kayan aiki.